The control console for fuel dispensers and automated accounting of fuel sales
The console not only provides control of fuel dispensers, but also has the ability to connect level gauges, send information to a data collection system, to connect the fuel card system with card readers, and keep track of fuel and related products.
The console has a configuration software that gives you greater customization options, allows to easily program the device and review the data locally.There is an ability to enable the logging of all operations performed on the console. Thus, you can locally, using a computer, review all the fuel sales operations.
|Fuel dispenser connection interface||485|
|Fuel dispenser communication protocol||ADAST Easycall
MM PETRO ZAP RS-485
TATSUNO Benc PDE
GALILEO PumpControl GC21
SB T10 AR
NUOVO PIGNONE CL
Pump ch. diag
|The maximum number of channels (concurrent protocols) of fuel dispensers||4|
|The maximum number of fuel dispensers, simultaneously connected to the console||16 logical addresses|
|The maximum number of nozzles for each fuel dispenser||6|
|Support for automatic fuel dispensing||Yes|
|ATG systems interface type||232/485|
|ATG system communication protocols||GILBARCO Veeder Root
START ITALIANA SMT-XMT
|The maximum number of channels (concurrent protocols) for ATG system connections||3|
|The maximum number of gauges, simultaneously connected to the console||16|
|Simultaneous use of multiple consoles at single petrol station||Yes|
|Connection to the data collection system||Yes|
|Connection to the fuel card system||Yes|
|The barcode scanner connection interface type||USB|
|Printer connection interface type||232|
|Supported printer model||UNS-TP61.01S|
|Cash drawer control supply voltage||12V|
|The cash drawer connector type||MicroJack 2.5 mono|
|Internet and local network connection interface type||Ethernet port RG-45|
|Card readers support||Yes|
|Display type||LCD character|
|Display resolution||20x4 characters|
|Number of keys||5х8=40|
Ask YOUR questions about
"The control console for fuel dispensers and automated accounting of fuel sales"
We will gladly answer all of your questions!
Other products of section:
Pinpad self-service terminal for petrol stations
Terminal Pinpad – is a self-service terminal intended for provision of self-service at petrol stations. It has wired/wireless communication and is equipped with a built-in display, keyboard, RFID-reader (Mifare/Em-Marine standards) and Wi-Fi module.
VRD-E forecourt card reader
VRD-E forecourt card reader with Ethernet interface is intended for reading of EM-Marine contactless identifiers (125 kHz) and its transmission using Ethernet interface (optionally readers able to read Mifare identifiers (13.56 MHz) and EM-Marine identifiers (125 kHz) are present).
Wireless interface converter for petrol stations
RFC converter is appointed for establishing of wireless communication between devices having interfaces RS-232 and RS-485.
Computer system of control and account
Computer system for management of petrol station equipment (fuel dispensers, cash registers, ATG systems, etc.) and accounting of fuel and related products sales