Dispenser interface converters

Products of this section:

Wireless interface converter RFC
Wireless interface converter RFC

Wireless interface converter RFC for petrol stations is appointed for establishing of wireless communication between devices having interfaces RS-232 and RS-485. RFC converter does not bring any changes to exchanged data between devices, thus RFC interface converter is a complete analogue to wired c...

GB dispenser interface converter
GB dispenser interface converter

GB interface converter (RS-485/RS-232 to 2-wire current loop and backwards) is intended for communication with fuel dispensers, which use 2-wire current loop interface, through interfaces: RS-232, RS-485 (2 wires) GB interface converter can be applied for communication with following brands of fuel ...

TH dispenser interface converter
TH dispenser interface converter

TH interface converter (RS-485/RS-232 to 3-wire current loop and backwards) is intended for communication with fuel dispensers, which use 3-wire current loop interface, through interfaces: RS-232, RS-485 (2 wires) TH interface converter can be applied for communication with following brands of fuel ...

HY dispenser interface converter
HY dispenser interface converter

HY interface converter (RS-485/RS-232 to 4-wire current loop and backwards) is intended for communication with fuel dispensers, which use 4-wire current loop interface, through interfaces: RS-232, RS-485 (2 wires) HY interface converter can be applied for communication with following brands of fuel ...

NP dispenser interface converter
NP dispenser interface converter

NP interface converter (RS-485/RS-232 to 4-wire current loop and backwards) is intended for communication with fuel dispensers, which use 4-wire current loop interface, through interfaces: RS-232, RS-485 (2 wires) NP interface converter can be applied for communication with following brands of fuel ...

LP dispenser interface converter
LP dispenser interface converter

LP interface converter (RS-485/RS-232 to 3-wire current loop and backwards) is intended for communication with fuel dispensers, which use 3-wire current loop interface, through interfaces: RS-232, RS-485 (2 wires) LP interface converter can be applied for communication with following brands of fuel ...

NZ dispenser interface converter
NZ dispenser interface converter

NZ interface converter (RS-485/RS-232 to 2-wire 2-wire voltage driven circuit and backwards) is intended for communication with fuel dispensers, which use 2-wire 2-wire voltage driven circuit interface, through interfaces: RS-232, RS-485 (2 wires) NZ interface converter can be applied for communicat...

NA dispenser interface converter
NA dispenser interface converter

NA interface converter (RS-485/RS-232 to non-addressable RS-422/RS-485/RS-232 and backwards) is intended for communication with fuel dispensers, which do not have a communication address in communication protocol and use one of the interfaces RS-422, RS-232 or RS-485 through interfaces: RS-232, RS-4...

RS-485 to RS-232 dispenser interface converter
RS-485 to RS-232 dispenser interface converter

RS485-4 dispenser interface converter (RS-485 to RS-232 interface and backwards) is intended for communication with fuel dispensers, which use RS-232 interface, through interfaces: RS-232 RS-485 (2-wire) Due to a reason that RS-232 interface in accordance with its standard is applied on distances no...

USB to RS-232 interface converter
USB to RS-232 interface converter

USB to RS-232 interface converter is intended for conversion from USB interface (USB 1.1, USB 2.0) into two independent RS-232 interfaces in duplex and half-duplex modes of data exchange.USB to COM-port interface converter is based on FTDI chip and provides reliable operation 24/7....


   Ask YOUR questions about "Dispenser interface converters"

CAPTCHA
Reload imageSound image
 

  Message is being sent... Please wait.