System of remote data gathering from a network of petrol stations (storage depots)
System of remote data gathering from a network of petrol stations (storage depots)
The system of remote data gathering from a network of petrol stations is intended for collection of information from a network of petrol station to a company office on fuel dispensings and totalizers of fuel dispensers and measurement data of automatic tank gauge (ATG) systems with subsequent processing and analysis of this information.
The system provides company management with objective and independent from influence of the "human factor" (actions of service personnel at petrol station) information on:
- fuel volume and price of dispensed fuel by each of the fuel dispensers for any period of time;
- fuel volume, fuel level, fuel temperature, fuel density, pressure, fuel mass underproduct water level in tanks of each petrol station (storage depot) for any periof of time;
- actual amount of petroleum products deliveries to tanks and their volume for any period of time;
- actual volume of dispensed petroleum products from tanks for any period of time;
- actual current residuals of petroleum products in tanks;
- actual current fuel price on each kind of fuel;
- dynamics of petroleum products sales on hours/days per the requested period;
- various analytics (realization of fuel per days, average values, etc).
Reports on petrol stations can be viewed using a standard web-browser.
Click on a scheme to enlarge
If case if it is necessary to receive information from fuel dispensers which are old and / or can not be controlled remotely from a control system - they can be automated using replacing their electronics with electronics and indicators for fuel dispensers (pumps) or controlling their internal resources using a controller over electromechanical fuel dispensers.
Ask YOUR questions about
"System of remote data gathering from a network of petrol stations (storage depots)"
Other products of section:
![]() |
ISPD-485 device for RS-485 interface isolation and surge protection
ISPD-485 device is used for isolation and surge protection of RS-485 interface lines. The ISPD-485 is installed in the RS-485 line to protect equipment from high-voltage impulse interferences caused by: lightning discharges, radiation from industrial equipment, various electromagnetic fields.
![]() |
Pinpad self-service terminal for petrol stations
Self-service terminal Pinpad is a terminal intended for provision of self-service at petrol stations. It has wired/wireless communication and is equipped with a built-in display, keyboard, RFID-reader (Mifare/Em-Marine standards) and Wi-Fi module, which allows it to be used for following purp