Well development and repair unit AK-60
The unit AK-60n is intended for the development and repair (including capital repair) of the oil and gas wells up to 3000 m deep, located as a well cluster or separately. It allows doing drilling jobs 1600 m deep. The load-carrying capacity of 80 tons allows liquidating emergency situations at repairing wells doing without units of higher capacity. The unit is designed for work in areas with cold and moderate climate (working temperature is up to -45?C, storage temperature is up to -55?C).
TECHNICAL CHARACTERISTICS
| Wheelbase | Chassis KrAZ-63221-01 (6 x 6) |
|---|---|
| Nominal capacity, kN (t) | 600 (60) |
| Maximum capacity (at breakdown elimination), kN (t) | 800 (80) |
| Winch drive capacity, kWt | 165,4 |
| Rate of rise, m/s | 0,21 - 1,60 |
| Mast height from the ground to the crown block shaft, m | 20 |
| Clearing hole of the drilling rotary table, mm | 360 |
| Table opening P-165, mm | 165 |
| Static load on the rotary table, kN (ts) | 800 (80) |
| Capacity of the rotary with the hydro drive, kWt | 80 |
| Rotation frequency, rev/min | 20 - 100 |
| Overall dimensions in over-the-road position, mm | 16,5 x 3,2 x 4,5 |
| Mounted unit total weight, t | 34,2 |
The Unit AK-60 can be completed with blowout preventer; the system of preparing, storage and purifying of the drilling mud; pumping equipment for pumping mortar. The Unit AK-60 meets the requirements of the safety system in oil and gas industries.
