Pumping unit with three plunger pump UNP-300х40
It is intended for forcing technological liquids while cementing, washing out sand plugs, hydro break of layers, drilling, capital repair as well as while doing other washing and squeezing jobs in oil and gas wells. The hydraulic part of the three plunger horizontal pump can be manufactured in different ways depending on the diameter of the installed plungers (O100, O110, O125, O140). The assembly is mounted on the chassis of the KrAZ automobiles.
TECHNICAL CHARACTERISTICS
| Mounted automobile base chassis | KrAZ 65101 |
|---|---|
| Power unit Engine Power rating, KWt (hp) Working speed of the engine crankshaft, rev/min |
Diesel drive PD 300-10 JMZ-7511.10-01 294 (400) 1600-1800 |
| Cementing plunger pump Plunger diameter, mm Plunger stroke, mm Maximum pressure, MPa Ideal feeding at maximum pressure, dm3/s Working pressure, MPa Ideal feeding at working pressure, dm3/s Maximum ideal feeding, dm3/s |
14T1 100 160 50 5,34 40 6,5 17,6 |
| Measuring tank capacity, m3 | 6,0 |
| Manifold: - Diameter of the accepting line of the pump, mm - Diameter of the forcing line of the pump, mm |
100 50 |
| Overall dimensions, no more than: - Length, mm - Width, mm - Height, mm |
9 600 2 500 2 850 |
| Total weight, kg | 19 300 |
Pumping unit UNP-300х40 meets the main process variables of the cementing unit АЧ 400Ч (Romania).
